← 返回 JSSC 论文列表JSSC 2012第11期RF & Wireless0.18μmCrystal Oscillator
A Low-Energy Crystal-Less Double-FSK Sensor Node Transceiver for Wireless Body-Area Network Joonsung Bae, Student Member , IEEE ,K i s e o k S o n g, Student Member , IEEE
一种低能耗无晶体双FSK传感器节点收发器,采用0.18μm CMOS工艺,1V供电,满足WBAN需求。
0.18μm CMOS, 1V, 10Mb/s, 100kHz精度
低能耗无晶体双FSKWBAN频率校准
▸创新点1:无晶体振荡器设计 - 采用注入锁定数字控制振荡器(IL-DCO)替代传统晶体振荡器(XO),显著降低系统能耗和成本,实现1-V电源供电下的低功耗运行(<2mW)。
▸创新点2:基于注入锁定的频率校准 - 提出新型校准方法结合注入锁定检测器(IL-detector),在100℃温度变化范围内将DCO频率漂移校准至100kHz精度,解决了无晶体架构的频率稳定性难题。
▸创新点3:可扩展双FSK调制方案 - 通过功率高效的开关调制器实现分频式发射机,支持10Mb/s数据速率,满足WBAN对服务质量(数据率/误码率/网络共存)的多重要求。
▸创新点4:全集成CMOS实现 - 采用0.18μm CMOS工艺单芯片集成,IL-DCO提供80MHz参考源,校准模式功耗仅1mW,实现晶振-free的微型化传感器节点解决方案。
Abstract
An energy-ef ficient crystal-less double-FSK trans- ceiver for wireless body-area-network (WBAN) sensor nodes is implemented in 0.18- m CMOS technology with a 1-V supply. The injection-locking digitally controlled oscillator (IL-DCO) replaces the crystal oscillator (XO), which leads to signi ficantly reduce the energy consumption and system cost. With the pro- posed calibration method using an injection-locking detector (IL-detector), the frequency drift of DCO can be calibrated within 100-kHz accuracy over 100 temperature variation. For the full satisfaction to the WBAN requirements, such as wide range of quality of service in terms of data rate, bit error rate, and network coexistence, we adopt a scalable double-FSK modulation scheme with divider-based transmitter by a power-ef ficient switching modulator. As a result, the fabricated crystal-less double-FSK WBAN compatible sensor node transceiver consumes 1 and 2 mW in calibrating and transmitting modes, respect ively, at a data rate of up to 10 Mb/s, providing an 80 MHz reference source with 100-kHz accuracy by auto-calibrated DCO.