← 返回 JSSC 论文列表
📄 下载 JSSC 原文 PDF
JSSC 2014第4期Clocking & PLLs32nm SOIPLL

A Supply-Noise Sensitivity Tracking PLL in 32 nm SOI Featuring a Deep Trench Capacitor Based

32nm SOI工艺中采用深沟槽电容的自适应PLL设计,优化时钟数据补偿效果
处理器Fmax提升15.6%,动态功耗降低9.8%,PLL面积减少92.1%
自适应PLL时钟数据补偿深沟槽电容电源噪声敏感度32nm SOI
创新点1:自适应PLL设计优化时钟数据补偿(方法创新)。通过动态调整时钟路径延迟或PLL输出时钟周期,利用电源噪声共振效应,显著提升处理器最大操作频率(Fmax)达15.6%,或在相同频率下降低动态功耗9.8%。
创新点2:电源噪声敏感度跟踪环路(系统创新)。采用闭环监测机制,通过关键路径复制电路实时追踪时序误差,实现跨PVT(工艺、电压、温度)和操作条件的自适应优化补偿,提升系统鲁棒性。
创新点3:深沟槽电容技术应用(电路创新)。在环路滤波器中集成超高密度深沟槽电容,相比传统PLL减少92.1%的面积占用,同时维持滤波性能,适合纳米级SOI工艺集成。
创新点4:全自动化噪声适应机制(方法创新)。无需外部干预即可动态响应电源噪声变化,通过闭环反馈持续优化时钟-数据对齐精度,降低设计复杂度。
Abstract
An adaptive PLL that maximizes the timing com- pensation between clock and data, commonly referred to as the clock data compensation effect, is demonstrated in 32 nm SOI. A number of previous adaptive P LL designs have successfully proven that processor operating speed can be improved by modu- lating the clock path delay or the PLL output clock period using the resonant supply noise. In this work, we take the adaptive PLL concept one step further by achieving optimal clock data com- pensation across a wide range of PVT and operating conditions. This was accomplished by an autom ated supply-noise sensitivity tracking loop which constantly monitors any timing errors occur- ring in a critical path replica circuit. Compared to a conventional PLL, the proposed design achie ves up to a 15.6% improvement in processor Fmax or a 9.8% reduced dynamic power consumption under an iso-operating frequency for a realistic supply noise. Additionally, a 92.1% reduction in PLL area was achieved by employing ultra-high density deep trench capacitors in the loop filter.