← 返回 JSSC 论文列表JSSC 2019第3期Memory14nmSRAM
Bitline Charge-Recycling SRAM Write Assist Circuitry for VMIN Improvement and Energy Saving Hanwool Jeong, Se Hyeok Oh, Tae Woo Oh , Hoonki Kim, Chang Nam Park, Woojin Rim
提出基于位线电荷回收的SRAM写入辅助电路,降低最小工作电压并提升能效。
14nm FinFET, VMIN降低150mV, 能效提升11%-66%
SRAM写入辅助电荷回收位线VMIN优化
▸创新点1:位线电荷回收技术(电路创新) - 通过利用未选中位线上存储的电荷来提升选中存储单元的接地电压(CVSS),显著增强写入能力,相比传统方案节省11%-66%的能量消耗。
▸创新点2:垂直与水平CVSS布线方案(方法创新) - 针对金属布线方向提出两种优化结构(BCR-WA_V和BCR-WA_H),分别适配不同布局约束,在14nm FinFET工艺下实现面积开销相近或更优的同时,保持读性能退化<1%。
▸创新点3:低VMIN写入辅助电路(系统创新) - 通过电荷回收与CVSS动态调节协同设计,仿真显示VMIN降低150mV,实测数据验证BCR-WA_H方案实现125mV的VMIN改进,且静态噪声容限(SNM)仅退化25mV。
▸创新点4:能效-面积协同优化(方法创新) - 在电荷回收机制中集成布局感知设计,使BCR-WA_V/H在同等VMIN改善下,分别减少30%-66%的辅助电路能耗,且不增加额外掩模层。
Abstract
Bitline (BL) charge-recycling-based static random access memory (SRAM) write assist circuits (BCR-WA) are proposed to reduce the minimum operating voltage ( V MIN) of SRAM. In the proposed schemes, the charges stored on the unselected BL are utilized to raise the cell ground voltage (VSS) of the selected bit cell, and the increased cell VSS (CVSS) enhances the write ability. According to the metal routing direction of CVSS in the layout, two types of BCR- WA are proposed, BCR-WA for vertical CVSS routing (BCR- WA V) and horizontal CVSS routing (BCR-WA H).T oe v a l u a t e the proposed circuits, HSPICE simulations are performed and the test chip is implemented using a 14-nm FinFET tech- nology. Thanks to the charge-recycling operation, BCR-W A V and BCR-WAH can save energy by 11%–44% and 30%–66%, respectively, compared to the previous write assist circuits, with a comparable or less area overhead and an insignificant degradation in read performance ( <1%) and stability ( ∼25-mV degradation in maximum word-lin voltage). In addition, accord- ing to simulation results, BCR-W A V and BCR-WAH can lower VMIN by 150 mV . In particular, silicon measurement result for BCR-WAH proves an 125-mV improvement in VMIN.