← 返回 JSSC 论文列表
📄 下载 JSSC 原文 PDF
JSSC 2019第7期RF & Wireless

A CMOS Polar Class-G Switched-Capacitor PA With a Single High-Current Supply, for LTE NB-IoT and eMTC

提出一种仅需单一高电流电源的CMOS极性G类开关电容功率放大器,简化电源管理单元设计。
807 MHz, 27.1 dBm峰值输出功率, 33.3% PAE, 13位分辨率
CMOSG类功率放大器开关电容电源管理Cat-M1
仅需单一高电流电源
降低电源管理单元带宽要求
13位分辨率满足Cat-M1和Cat-NB1标准
Abstract
Class-G efficiency enhancement of switched- capacitor (SC) power amplifiers (PAs) requires the power man- agement unit (PMU) to have two high-current power supplies. This paper presents a Class-G efficiency enhancement that only requires one single high-current power supply with a lower band- width requirement, significantly simplifying the PMU. The system analysis shows that a transmitter with a resolution of 13 bits and a sample rate of F RF/2 meets the requirements of the Cat-M1 and Cat-NB1 standard. The presented PA consists of a number of parallel SC cells. Each cell can be configured in two output-power modes, using only a single supply. At 807 MHz, the peak output power is 27.1 dBm, with an efficiency (PAE) of 33.3%. The efficiency at −6a n d−12 dB FS is 22.5% and 14.4%, respectively, which is an improvement of 1.3 × and 1.7× compared to Class-B. The 13-bit resolution enables a power-control range for Cat-M1 and Cat-NB1 signals of >63 dB. In that range, the error vector magnitude (EVM) is <4.2%.