← 返回 JSSC 论文列表
📄 下载 JSSC 原文 PDF
JSSC 2021第1期Clocking & PLLs22nmVCODLL

A Self-Calibrated 2-bit Time-Period Comparator-Based Synthesized Fractional- N MDLL in 22-nm FinFET CMOS

采用22nm FinFET工艺的自校准2位时间周期比较器合成分数N MDLL,实现低功耗和低杂散。
22nm FFL FinFET, 1.2-3.8 GHz, 2.74 ps RMS抖动, -47 dBc杂散, 3.19 mW功耗, FOM -226.3 dB
分数N MDLL时间周期比较器数字时间转换器自校准FinFET
2位时间周期比较器(TPC)抑制杂散且无相位偏移误差
可编程延迟实现时间域周期比较降低功耗
数字环路背景校正DTC延迟增益失配
Abstract
This article describes a synthesized fractional- N multiplying delay-locked loop (MDLL) implemented in Intel 22-nm FFL FinFET technology. A 2-bit time-period compara- tor (TPC) is proposed to adjust the ring oscillator frequency to suppress the spurs without introducing errors due to its inherent phase offset. A programmable delay is used to compare the periods of the MDLL output in time domain, reducing power con- sumption and making the design synthesizable. TPC 2-bit output achieves fast and robust locking without any initial calibration. The fractional multiplication ratio is achieved by using a digital- to-time converter (DTC) in the reference path with a replica of the digitally controlled oscillator (DCO) to automatically achieve a range of one DCO period. Any variation in DTC delay due to gain mismatch is corrected by a digital loop operating in the background. A detailed analysis of the small-signal model and noise of the proposed MDLL has also been presented. The core area of the synthesized design is 0.0052 mm 2 while operating over the frequency range from 1.2 to 3.8 GHz. The integrated rms jitter is 2.74 ps, and the spurs are below −47 dBc measured at 3.6175 GHz. Fractional-N MDLL power consumption is 3.19 mW with the figure of merit (FOM) of −226.3 dB.