← 返回 JSSC 论文列表
📄 下载 JSSC 原文 PDF
JSSC 2022第2期Clocking & PLLs65nmPLL

A Wide-Lock-In-Range and Low-Jitter 12–14.5 GHz SSPLL Using a Low-Power Frequency-Disturbance-Detecting and

一种采用频率扰动检测/校正环路的宽锁定范围低抖动12-14.5 GHz SSPLL
65nm CMOS, 50MHz fREF, 160MHz锁定范围, <800ns频率重捕获时间, 83fs rms抖动, 7.7mW总功耗
锁相环亚采样宽锁定范围低抖动频率扰动检测
频率扰动检测/校正(FDC)环路
无需在抖动和功耗之间进行设计折衷
基于频率而非相位信息的快速重捕获
Abstract
This article presents a wide-lock-in-range and ultralow-jitter, 12–14.5 GHz subsampling phase-locked loop (SSPLL) using a frequency-disturbance-detecting/correcting (FDC) loop. By detecting and correcting the frequency distur- bance, f D , frequently, the FDC loop can increase the lock-in range of the SSPLL to 3.2 times the reference frequency, fREF. Since the FDC loop only is concerned with correcting an fD-event at the output and is not concerned with the jitter , there is no design tradeoff between the jitter , and the power consumption as is the case in previous techniques. Due to its logic using frequency information rather than phase, the FDC loop also can reduce the time required for the reacquisition of the frequency. In this work, the prototype SSPLL was fabricated in a 65 nm CMOS, and it used the 50 MHz f REF . In the measurements, the FDC loop that consumed only 150 µW of power made the SSPLL achieve the lock-in range of 160 MHz and the frequency-reacquisition time of less than 800 ns. The measured rms jitter at 13 GHz was 83 fs. The active area was 0.23 mm 2 , and the total power consumption was 7.7 mW.