← 返回 JSSC 论文列表JSSC 2023第5期RF & Wireless45nm CMOS SOINeural Network Accelerator
A Time-Modulated Concurrent Steerable Multibeam MIMO Receiver Array With Spectral-Spatial Mapping Using One Beamformer and Single-Wire Interface
提出一种26-33 GHz宽带MIMO接收器阵列,利用时间调制实现多波束并发和快速波束扫描。
28 dB最大转换增益, 5.78 dB噪声系数, -38 dBm输入IP1dB, 支持2.4/4.2 Gb/s 16/64 QAM调制
时间调制阵列多波束MIMO波束成形毫米波CMOS接收器
▸时间调制阵列实现多波束并发
▸单一阵列波束成形器支持SDMA通信
▸内置移相器实现低复杂度快速波束扫描
Abstract
This work proposes a wideband 26–33 GHz multiple-input- multiple-output (MIMO) receiver (RX) array that leverages time-modulation operation to achieve concurrent steerable multibeam MIMOs (MB-MIMOs) using only one single array beamformer. Time-modulated arrays (TMAs) introduce time as an additional degree of freedom to concurrently sample and multiplex multiple received signals in various incident angles. In other words, time modulation on the RX array enables spatial-spectral mapping that maps received information in different directions to different frequency components in received spectrum with crossbeam isolation, which can be de-modulated by downstream circuits. Thus, the proposed TM MB-MIMO RX array supports concurrent space division multiple access (SDMA) communication with only one beamformer. Furthermore, with built-in phase shifters, the TM MB-MIMO RX also achieves fast-beam scanning with low hardware complexity. A proof-of- concept 26–33 GHz TM MB-MIMO RX array is implemented in the GlobalFoundries 45 nm CMOS RF silicon on insulator (SOI). The demonstrated RX element shows S11 < −10 dB across 24–32 GHz, and its maximum conversion gain (CG) is 28 dB with a 3 dB bandwidth of 26–33 GHz. The measured noise figure (NF) is 5.78 dB at 28 GHz with RX input-referred IP1 dB of −38 dBm. The proposed RX supports wideband-16/64 QAM single carrier modulations with maximum modulation speeds of 2.4/4.2 Gb/s, respectively. The demonstrated MB-MIMO RX array achieves five concurrent