← 返回 JSSC 论文列表JSSC 2024第10期RF & Wireless28nmDACEqualizer
A Fully Integrated QPSK/16-QAM D-Band CMOS Transceiver With Mixed-Signal Baseband Circuitry Realizing
一款基于28nm CMOS工艺的全集成D波段收发器,支持QPSK和16-QAM调制,具有混合信号基带处理能力。
28nm CMOS, 24-Gb/s QPSK, 48-Gb/s 16-QAM, TX带宽21 GHz, RX带宽18 GHz, TX Psat 13.1 dBm, TX OP 1 dB 7.5 dBm, RX NF 9.3 dB
D波段CMOS收发器QPSK16-QAM混合信号基带
▸采用混合匹配技术的D波段射频前端
▸嵌入式四抽头FIR滤波器的Cartesian RF-DAC
▸包含ADPLL和LO分配网络的本地振荡器
Abstract
This work presents a fully integrated D-band transceiver (TRX) in 28-nm CMOS. The system architec- ture introduces a radio-frequency digital-to-analog converter (RF-DAC) and the complete mixed-signal baseband (BB) cir- cuitry, including the equalizer, realizing fully digital BB interfaces at 24-Gb/s quadrature phase shift keying (QPSK) and 48-Gb/s 16-quadrature amplitude modulation (16-QAM). Innovations at the circuit level encompass: 1) the D-band RF front end (FE) using the proposed hybrid matching technique; 2) the two-stage conversion paths highlighting the Cartesian RF-DAC with an embedded four-tap finite impulse response (FIR) filter; 3) the local oscillator (LO) including an all-digital phase-locked loop (ADPLL) and the LO distribution network; and 4) the mixed-signal BB circuitry. The TRX achieves a transmitter (TX) bandwidth of 21 GHz, a receiver (RX) bandwidth of 18 GHz, a TX saturated output power ( Psat) of 13.1 dBm, a TX output 1-dB compression point (OP 1 dB) of 7.5 dBm, and an RX noise figure (NF) of 9.3 dB.